[Mich VHF UHF Society] beacon signal report

[Rich Anderson]

Dan, q5 s0 on my PAR omni loop@ 18' in EN62xx
Rich, WA8MTI
On Jun 20, 2015 5:11 PM, "Dano" <blown4.6 at gmail.com> wrote:

> Hello all.
>
> I built a 6m half-wave loop and installed it on a temporary pole at 20ft.
> I am curious to see whether it can be heard so if you could please listen
> to 50.081 CW and email me a signal report I would be very thankful.
>
> The SWR curve and frequency of low SWR is almost spot on what was
> predicted by EZNEC, but since it isn't a beam I cannot turn it to find
> nulls and see if the pattern is also as predicted. Don't worry, this is
> only temporary for testing purposes. I do not plan on putting up a 6m
> propagation beacon.
>
> I'll leave it in beacon mode for the next few hours unless there is a 6m
> opening to EU/AF, etc. then I'll turn it off and chase some DX. :-)
>
>
> Thank you in advance for your time.
>
>
> 73,
>
> Dan KF6A...
>
> _______________________________________________
> MiVUS mailing list
> MiVUS at mivus.org
> subscribe/unsubscribe
> http://mail.mivus.org/mailman/listinfo/mivus_mivus.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mail.mivus.org/pipermail/mivus_mivus.org/attachments/20150620/102a0da8/attachment.htm>